Huawei SUN2000-450W-P2 Smart PV optimizer 450W 10-80V Isc 14.5A MC4

Huawei SUN2000-450W-P2 Smart PV optimizer 450W 10-80V Isc 14.5A MC4

The HUAWEI Smart PV Optimizer SUN2000-450W-P2 compatible with new generation Huawei single-phase L1 and three-phase M1/M2 and M3 inverters is the ideal solution for making the most of your photovoltaic system. Can be installed on a single module. Power optimization device for PV systems, with a maximum input power of 600W and a maximum efficiency of 99.5%. Communication via DC Power Line.

Technical specifications
INPUT
Rated input power: 450W
Absolute maximum input voltage: 80V
MPPT operating voltage range: 10 - 80V
Maximum short circuit current: 14.5A
Maximum efficiency: 99.5%
Weighted Efficiency: 99.0 %
Overvoltage category: II
OUTPUT
Max output voltage: 80V
Max output current: 15A
Output bypass: YES
Output voltage for optimizer: 0V
Output impedance for optimizer: 1k ohm ± 10%
COMMUNICATION
Communication method: MBUS
COMPLIANCE WITH STANDARDS
Safety: IEC62109-1 (class II safety)
RoHS: Yes
GENERAL DATA
Dimensions (L x W x H): 75 x 140 x 28mm
Weight (including cables): 0.6 kg
Accessory for installation (optional): Frame mounting plate / T-bolt 4
Input connector: MC4 – Staubli
Output connector: MC4 – Staubli
Output cable length: 1.3m
Operating temperature / relative humidity: -40 °C～85 °C 5 / 0%RH～100%RH
Degree of protection: IP68
Compatible Products: SUN2000-2/3/3.68/4/4.6/5/6KTL-L1, SUN2000-3/4/5/6/8/10KTL-M1, SUN2000-12/15/17/20KTL-M2, SUN2000 -30/36/40KTL-M3

PV System Design
Minimum String Length (Power Optimizers):
- SUN2000-2~6KTL-L 1: 4
- SUN2000-3~1 0KTL-M1: 6
Maximum String Length (Power Optimizers):
- SUN2000-2~6KTL-L 1: 25
- SUN2000-3~1 0KTL-M1: 35
Maximum DC power per string:
- SUN2000-2~6KTL-L 1: 6000 W
- SUN2000-3~1 0KTL-M1: 10000 W

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.