12V 820W All-in-One 5120Wh Storage 1200W Inverter M1+ Photovoltaic Kit to power Camper Boat

12V 820W All-in-One 5120Wh Storage 1200W Inverter M1+ Photovoltaic Kit to power Camper Boat

12V 820W M1+ Photovoltaic Kit complete with two 410W photovoltaic module, SmartSolar MPPT 150/70 70A Solar Charge Controller Victron Energy, WANROY LiFePO4 Lithium Battery 12V 200Ah with a BMS charge management and monitoring system, Victron Energy Orion-Tr Smart 12/12V 30A 360W DC-DC Charger Isolated, Victron Blue Smart 12/30/1 Charger 12V 30A IP22 1 wall outlet with Bluetooth and Solar Cable Kit 2x5m-6mmq with F/M MC4 connectors for stand-alone PV systems, remote houses, camper vans, boats, industrial applications, lighting systems, road signs, TVCC systems and much more.
The kit is made by:
2 - 410W monocrystalline silicon photovoltaic panels #N151030050303;
1 - Victron Phoenix C12/1200 Inverter 12V 1200W Peak 2400W #UF64918W;
1 - Victron Energy SmartSolar MPPT 150/70-Tr 70A Solar Charge Controller #OF012090;
2 - WANROY LiFePO4 Lithium Battery 12V 200Ah with BMS #N150520017375;
1 - Victron Energy Orion-Tr Smart 12/12V 30A 360W DC-DC Charger Isolated #UF23149S;
1 - Victron Blue Smart 12/30/1 Charger 12V 30A IP22 1 wall outlet with Bluetooth #UF21665A;
1 - Solar Cable Kit 2x5m-6mmq with F/M MC4 connectors #N151230750281.

n°2 - 410W monocrystalline silicon photovoltaic panels

The 410W solar module is a high-efficiency black-white frame monocrystalline solar module with half-cut technologies, which consists of halving the cells. Efficiency of up to 21.3% thanks to superior cell technology and cutting-edge production methods. This technology reduces thermal resistance and increases power output by 5 to 10 Wp. Self-cleaning glass. Powerful module with low irradiance even in low light conditions (morning or cloudy).
• High efficiency monocrystalline technology
• Low current density technology to effectively reduce internal power consumption.
• MBB and HC technology to reduce negative affect from yielding caused by micro cracks and shadows.
• High power output leads to lower BOS cost.
Global, Tier 1 bankable brand, with independently certified state-of-the-art automated manufacturing. Industry leading lowest thermal coefficient of power. Industry leading 12 years product warranty. Excellent low irradiance performance. Excellent PID resistance. Dual stage 100% EL inspection warranting defect-free product. Module Imp binning radically reduces stringmismatch losses. Excellent wind load 2400Pa and snow load 5400Pa under certain installation method.
Specification:
Model: RSM120-8-410M-B-TW;
Nominal Power: 410 W;
Cell Type: Monocrystalline;
Number of cells in series: 120 (5x12+5x12);
Open-circuit Voltage (Voc): 41.90 V;
Maximum Power Voltage (Vmp): 34.89 V;
Short-circuit Current (Isc): 12.47 A;
Maximum Power Current (Imp): 11.76 A;
Max System Voltage: 1500 V DC;
Module Efficiency: 21.3 %;
Frame: anodizedaluminium alloy;
Dimension: 1754x1096x30 mm;
Weight: 21 kg.

n°1 - Victron Phoenix C12/1200 Inverter 12V 1200W Peak 2400W

Developed for professional duty, Phoenix pure sine inverters are suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. A unique feature of the SinusMax technology is very high start-up power. Phoenix inverters, in fact, are well suited to power up difficult loads such as: refrigeration compressors, electric motors and similar applications. Conventional high frequency technology does not offer such extreme performance.
 Standard features
Aluminium epoxy powder coated case with drip shield, circuit board protection with an acrylic coating, forced cooling with temperature sensors, protection against: output short circuit, overload, low battery voltage, reverse polarity, reverse voltage on output, input voltage ripple, high temperature. Relay multifunction.

Specifications:
Model: C12/1200
INPUT VOLTAGE RANGE V DC: 9,5 - 17,0
CONT. OUTPUT POWER* VA: 1200
PEAK POWER W: 2400
MAX. EFFIC.%: 92
WEIGHT kg (lbs): 10 (22)
Size: 375x214x110 mm (14.7x8.4x4.3 inches).

*Continuous output power at 25°C - OUTPUT: 230V AC ± 2% - 50 Hz ± 2%.
All models are suitable for parallel (max 6 parallel units) and 3-phase operation.

n°1 - Victron Energy SmartSolar MPPT 150/70-Tr 70A Solar Charge Controller

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98 %.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth.
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.

Technical Specifications:
- Nominal battery voltage: 12/24/48 VAuto select (36 V: manual);
- Rated charging current: 70A;
- Nominal PV power, 12 V 1a,b): 1000 W;
- Nominal PV power, 24 V 1a,b): 2000 W;
- Nominal PV power, 36 V 1a,b): 3000 W;
- Nominal PV power, 48 V 1a,b): 4000 W;
- Max PV 2 short-circuit current: 50 A (max 30 A for MC4 conn.);
- Max open circuit PV voltage: 150 V at minimum temperature conditions/145 V max. during start-up and operation;
- Efficiency at full load: 98%;
- Self-consumption: Less than 35 mA @ 12 V / 20 mA @ 48 V;
- Charging voltage - absorption: Default: 14.4 / 28.8 / 43.2 / 57.6 V (adjustable via: rotary switch, display, VE.Direct or Bluetooth);
- Charging - maintenance voltage: Default: 13.8 / 27.6 / 41.4 / 55.2 V (adjustable via: rotary switch, display, VE.Direct or Bluetooth);
- Charging voltage - equalization: Default: 16.2V / 32.4V / 48.6V / 64.8V (adjustable);
- Charging algorithm: multi-step adaptive (eight programmed algorithms) or user-defined algorithm;
- Temperature compensation: -16 mV / -32 mV / -64 mV / °C;
- Protection: PV Reverse Polarity / Output Short Circuit / Over Temperature;
- Operating temperature: -30 to +60°C (maximum rated output up to 40°C);
- Humidity: 95%, non-condensing;
- Maximum height: 5000 m (maximum rated output up to 2000 m);
- Color: Blue (RAL 5012);
- PV terminals: 35 mm² / AWG2 (Tr models) Two pairs of MC4 connectors (MC4 models);
- Battery terminals: 35 mm² / AWG2;
- Protection category: IP 43 (electronic components), IP22 (connection area);
- Weight: 3kg;
- Dimensions: 185x250x95 mm;
- Safety: EN/IEC 62109-1, UL 1741, CSA C22.2.

n°2 - WANROY LiFePO4 Lithium Battery 12V 200Ah with BMS

Made with the safest lithium iron phosphate battery technology, the Wanroy LiFePO4 12V 200Ah Batteries offer exceptional durability and a longer life cycle. What is surprising is the possibility of carrying out over 3000 charge and discharge cycles, guaranteeing use for at least 10 years. Equipped with a battery management system (BMS), it is able to operate efficiently while ensuring safety and reliability.
Lighter, smaller, more powerful
The Wanroy Batterie LiFePO4 12V 200Ah is lighter, more compact and more powerful! The slim design makes it light and practical, while its core holds long-lasting and powerful energy. With a high capacity of 100 amps/hour, it will accompany you freely without fearing energy exhaustion anymore.
The importance of the battery management system (BMS)
To protect your battery pack, ensure a stable energy supply and offer you excellent energy management, our Battery Management System (BMS) is here to support you. From everyday needs to special situations, our BMS offers comprehensive protection for lithium battery packs, ensuring a stable case for your power needs.

•    Integrated battery management system
•    After 3000 cycles with 80% DOD, 80% capacity still remains
•    Lifespan of at least 15 years without the need for maintenance
•    Fully-fledged replacement for lead-acid batteries
•    Eco-friendly, lead-free, acid-free
•    Compatible with Victron Energy, Growatt, Green Cell, etc.

Smart long-term solution
Despite the higher price, LiFePo4 batteries are characterized by much lower operating costs, which means that the purchase pays for itself very quickly. Over its lifetime, a LiFePo4 battery costs more than 100% less than a standard AGM battery, making it a worthwhile investment and a smart long-term solution.

Electrical performance:
Battery technology: LiFePO4 (Lithium Iron Phosphate)
Nominal tension: 12 V
Capacity (Ah): 200 Ah
Maximum continuous load power: 1280 W
Nominal energy: 2560 Wh
Capacity: 100%
Cycle time: >3000 cycles
Lifespan: >15 years
Charge/Discharge performance:
Charging voltage: 14.4 V (maximum 14.6 V)
Maximum continuous charge/discharge current: 100 A
Peak discharge current @10S: 250 A
Performance in temperature:
Discharge Temperature: -20 ~ +60 °C
Charge Temperature: 0 ~ +45 °C
Storage Temperature: -5 ~ +35 °C
High Temperature Cut-Off: 65 °C
Mechanical performance:
Terminal Type: M8
Terminal Torque: 80 ~ 100 in-lbs (9 ~ 11 N-m)
Terminal pole: F12 (M8 internal thread)
Case Material: ABS
Enclosure Protection: IP65
Dimension (LxWxH): 500x240x220 mm
Weight: 23 kg.

n°1 - Victron Energy Orion-Tr Smart 12/12V 30A 360W DC-DC Charger Isolated

The Orion-Tr Smart DC-DC charger isolated is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch.
The Orion-Tr Smart charger is suitable for both lead acid and lithium batteries. This model is 360W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
• For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
• For lithium batteries absorption time is fixed, default 2 hours.
• Alternatively, a fixed output voltage can be chosen.
Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
High temperature protected The output current will reduce at high ambient temperature.
IP43 protection When installed with the screw terminals oriented downwards.
Screw terminals No special tools needed for installation.
Input fuse (not replaceable)
Features:
Model: Orion-Tr SMART 12/12-30 Isolated;
Input voltage range(1): 10-17V;
Under-Voltage Shutdown: 7V;
Under voltage restart: 7.5V;
Rated output voltage: 12.2V;
Output voltage regulation range: 10-15V;
Output voltage tolerance: +/- 0.2V;
Output Noise: 2mV rms;
continuous current output at nominal output voltage and 40 ºC: 30 A;
Maximum output current (10 sec.) at nominal output voltage minus 20 %: 40 A;
Short circuit output current 60A;
Continuous power output at 25ºC: 430W;
Continuous output power at 40ºC: 360W;
Efficiency: 87%;
Without load current at the load input: < 80 mA;
Standby current < 1mA;
Galvanic Isolation: 200 VDC between input, output and case;
Operating temperature range: -20 to +55 ºC (3 % reduction per °C above 40 °C);
Humidity: Max. 95% non-condensing;
DC connection: Screw terminals;
Maximum cable cross section: 16 mm² (AWG6);
Weight: 1.8kg (3lbs);
Dimensions HxWxD: 130x186x70 mm (5.1 x 7.3 x 4.0 inches);
Protection category: IP43 (electronic components), IP22 (connection area);
Standards: EN 60950, EN 61000-6-3, EN 55014-1, EN 61000-6-2, EN 61000-6-1, EN 55014-2, ECE R10-5.

n°1 - Victron Blue Smart 12/30/1 Charger 12V 30A IP22 1 wall outlet with Bluetooth

The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
The battery is charged, smartly... to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
Recovery of deeply-discharged 'dead' batteries
Unlike other brands, the Blue Smart IP22 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Check the status of your battery remotely
The Blue Smart IP22 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.

Specifications:
MODEL: 12/30 IP22 - 1 Output
INPUT VOLTAGE RANGE: 180-265V AC / 45-65Hz
CHARGE VOLTAGE ABSORPTION:
Absorption: 12V Normal 14,4V, High 14,6V, Li-ion 14,2V
Float: 12V Normal 13,8V, High 13,8V, Li-ion 13,35V
Storage: 12V Normal 13,2V, High 13,8V, Li-ion 13,5V
CHARGE CURRENT: 30 A
WEIGHT kg (lbs): 1.4 (3.1)
SIZE: 235 x 108 x 65 mm (9.2 x 4.2 x 2.6 inches)

n°1 - Solar Cable Kit 2x5m-6mmq with F/M MC4 connectors

Cable kit made of black 6 mm² 5 meter photovoltaic cable, red 6 mm² 5 meter photovoltaic cable, MC4 female and male connectors. Specifically designed for the creation of quick and safe connections in the field of photovoltaic applications with the most common inverter and junction boxe. They are made with tinned copper contacts and PPO housing. Resistant to mechanical and climatic stress and resistant to UV rays. The cables and connectors are supplied pre-wired.

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.