Victron SmartSolar MPPT 150/70-Tr 12/24/48V 70A VE.Can Solar Charge Controller

Victron Energy SmartSolar MPPT 150/70-Tr 12/24/48V 70A Solar Charge Controller

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the powervoltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98 %.
Flexible charge algorithm
Fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
Internal temperature sensor and optional external battery voltage, temperature and current sensing via Bluetooth
A Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt can be used to communicate battery voltage and temperature (and current, in case of a BMV-712 or a SmartShunt) to one or more SmartSolar Charge Controllers.
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can, and up to 10 units with Bluetooth.
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.

Technical Specifications:
- Nominal battery voltage: 12/24/48 VAuto select (36 V: manual);
- Rated charging current: 70A;
- Nominal PV power, 12 V 1a,b): 1000 W;
- Nominal PV power, 24 V 1a,b): 2000 W;
- Nominal PV power, 36 V 1a,b): 3000 W;
- Nominal PV power, 48 V 1a,b): 4000 W;
- Max PV 2 short-circuit current: 50 A (max 30 A for MC4 conn.);
- Max open circuit PV voltage: 150 V at minimum temperature conditions/145 V max. during start-up and operation;
- Efficiency at full load: 98%;
- Self-consumption: Less than 35 mA @ 12 V / 20 mA @ 48 V;
- Charging voltage - absorption: Default: 14.4 / 28.8 / 43.2 / 57.6 V (adjustable via: rotary switch, display, VE.Direct or Bluetooth);
- Charging - maintenance voltage: Default: 13.8 / 27.6 / 41.4 / 55.2 V (adjustable via: rotary switch, display, VE.Direct or Bluetooth);
- Charging voltage - equalization: Default: 16.2V / 32.4V / 48.6V / 64.8V (adjustable);
- Charging algorithm: multi-step adaptive (eight programmed algorithms) or user-defined algorithm;
- Temperature compensation: -16 mV / -32 mV / -64 mV / °C;
- Protection: PV Reverse Polarity / Output Short Circuit / Over Temperature;
- Operating temperature: -30 to +60°C (maximum rated output up to 40°C);
- Humidity: 95%, non-condensing;
- Maximum height: 5000 m (maximum rated output up to 2000 m);
- Color: Blue (RAL 5012);
- PV terminals: 35 mm² / AWG2 (Tr models) Two pairs of MC4 connectors (MC4 models);
- Battery terminals: 35 mm² / AWG2;
- Protection category: IP 43 (electronic components), IP22 (connection area);
- Weight: 3kg;
- Dimensions: 185x250x95 mm;
- Safety: EN/IEC 62109-1, UL 1741, CSA C22.2.

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address.
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.