Fronius PRIMO GEN24 6.0 PLUS 6kW Hybrid Inverter 2 MPPT 6000W

Fronius PRIMO GEN24 6.0 PLUS 6kW Hybrid Inverter 2 MPPT 6000W

Sustainable, reliable, future-proof: using our Fronius GEN24 6.0 Plus inverter as the heart of a photovoltaic system lets you flexibly and economically produce energy yourself. You can connect a battery system to the hybrid inverter to use the solar energy that you produce for electricity, heating, cooling, and e-mobility. Full solar power for your private energy revolution with the Fronius GEN24 Plus.

Maximum flexibility
With the Fronius GEN24 Plus as the heart of the photovoltaic system, you will do a whole lot more than launch your own personal energy revolution; you will also gain access to all the possibilities and benefits of solar energy.
Backup power for every situation
Your energy supply must be reliable: with the Fronius GEN24 Plus, you can choose either “PV Point” or “Full Backup”, a backup power supply for the entire household.
Easy installation
Save time and money: fast and safe installation with 180° quick-fastener screws, push-in spring terminals, and a well-designed wall assembly system.
Support and tools
Never-ending support: free and efficient Fronius solutions are available for planning, installation, and system monitoring. This increases customer satisfaction and minimizes maintenance effort.

Technical data:
INPUT DATA
Number of MPP trackers: 2;
DC input voltage range (Udc min - Udc max): 65 - 600 V;
Nominal input voltage (Udc,r): 400 V;
Feed-in start-up input voltage (Udc start): 80 V;
Usable MPP voltage range: 65 - 480 V;
Max. usable input current (Idc max) MPPT1/MPPT2: 22 A / 12 A;
Max. array short circuit current (Isc pv) MPPT1/MPPT2: 36 A / 19 A;
Number of DC connections MPPT1/MPPT2: 2/2;
Max. usable DC power MPPT1/MPPT2/Total: 5,200 W / 5,760 W / 6,200 W;
Max. PV generator output Wpeak MPPT1/MPPT2/Total: 7,500 Wpeak / 5,760 Wpeak / 9000 Wpeak.
OUTPUT DATA
AC rated power (Pac,r): 6000 W;
Apparent power: 6000 VA;
Max. output power: 6000 VA;
Nom. AC output current 220Vac/230Vac: 27.3 A / 26.1 A;
Grid connection (Uac,r): 1~ NPE 220/230 V (+20 %/-30 %);
Frequency (frequency range fmin- fmax): 50/60 (45 - 65) Hz;
Total harmonic distortion: <2 %;
Power factor (cos φac,r): 0.8 - 1 ind./cap.
Output data PV Point
Nom. output power PV Point: 3000 VA;
Grid connection PV Point: 1~ NPE 220/230 V;
Switching time: <20 sec.
Output data Full Backup
Nom. output power Full Backup: 6000 VA;
Grid connection Full Backup: 1~ NPE 220/230 V;
Switching time: <35 sec.
Battery connection
Number of DC inputs: 1;
Max. input current (Idc max): 22 A;
DC input voltage range (Udc min - Udc max): 150 - 455 V;
DC battery connection technology: 1x BATT+ and 1x BATT- push-in spring terminals 2.5 - 10 mm²;
Max. DC input/output power: 6200 W;
Max. charging power for AC coupling: 6000 W;
Compatible batteries: BYD Battery-Box Premium HVS/HVM & LG RESU FLEX.
Efficiency
Max. efficiency: 97.6 %;
Euro. efficiency (ηEU): 97.1 %;
MPP adaptation efficiency: > 99.9 %.
Interfaces
DC isolation measurement: Integrated;
Overload performance: Operating point shift, power limiter;
DC disconnector: Integrated;
Reverse polarity protection: Integrated;
WLAN / 2 × Ethernet LAN: Fronius Solar.web, Modbus TCP SunSpec, Fronius Solar API (JSON);
6 digital inputs/outputs: Connection to ripple control receiver, energy management;
Emergency shut-off (WSD): Integrated;
Datalogger and web server: Integrated;
2 × RS485: Modbus RTU SunSpec (third-party provider)/Fronius Smart Meter, battery, Fronius Ohmpilot.
General data
Protection class: IP 66;
Safety class: 1;
Night consumption: < 10 W;
Overvoltage category (DC/AC): 2/3;
Inverter concept: Transformerless;
Cooling: Active Cooling Technology;
Installation: Indoor and outdoor installation;
Ambient temperature range: -40 to +60°C;
Permissible humidity: 0 - 100%;
Noise emissions dB: < 42 A;
Max. altitude above sea level: 4,000 m;
DC connection technology PV: 4x DC+ and 4x DC- push-in spring terminals 2.5 - 10 mm²;
AC connection technology: 3-pin AC push-in spring terminals 2.5 - 10 mm², 3-pin backup power push-in spring terminals 1.5 - 10 mm², 2x PE screw terminals 2.5–16 mm² and 3x 2.5 - 10 mm²;
Certificates and compliance with standards: IEC 62109, IEC 62909, AS/NZS 4777.2, CEI 0-21, ABNT BNR 16149 and 16150, IEC 62116, IEC 61727, G98/G99;
Backup power functions: PV Point or Full Backup;
Country of manufacture: Austria;
Life cycle analysis: In accordance with ÖNORM EN ISO 14040 and 14044 (checked by employees from Fraunhofer IZM);
Dimensions (height × width × depth): 530×474×165 mm;
Weight (inverter/with packaging): 15.4/19 kg.

For more details, we recommend viewing the technical data sheets of each single component of the kit or asking our technicians for information.

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.