10.8kW Off Grid Photovoltaic Kit with Victron MultiPlus II 48/10000 Inverter and Pylontech PELIO 51.2V 20.48kWh Batteries

10.8kW Off Grid Photovoltaic Kit with Victron MultiPlus II 48/10000 Inverter and Pylontech PELIO 51.2V 20.48kWh Batteries

Solar kit consisting of 24 x 450W high-efficiency monocrystalline silicon photovoltaic panels; the Victron MultiPlus ll 48/10000/140-100 Inverter 48V 10000W with 48V 140A Charger; 2 x 48V 5.76kW Victron SmartSolar MPPT RS 450/100-Tr Isolated charge controller; the Pylontech PELIO 51.2V 20.48kWh GROUND KIT low-voltage lithium battery for off-grid systems with grid support.
The perfect solution for off-grid systems, with the option of grid support to ensure continuity and maximum autonomy.
This kit allows us to exploit photovoltaic energy to provide the necessary electricity. The inverter can directly supply the energy generated by the photovoltaic panels to the electrical system of your home or business to meet the energy needs. Also, if demand is high, the electricity grid will be combined with PV generation. At night, when there is no photovoltaic energy production, the home, industry or company is powered through the electricity distribution network or the battery if connected (in this case, withdrawals from the network are limited to a maximum using almost always your own energy). Grid-connected photovoltaic systems are the best-paying because they allow you to save on your electricity bill with a low investment.

The kit is made by:
(24) Monocrystalline photovoltaic panel 450W or higher (Color and brand will be supplied according to current stock availability);
(1) Victron MultiPlus ll 48/10000/140-100 Inverter 48V 10000W with 48V 140A Charger #UF21875M;
(2) Victron SmartSolar MPPT RS 450/100-Tr 48V 5.76kW Isolated charge controller #UF23617Z;
(1) Pylontech PELIO 51.2V 20.48kWh GROUND KIT Low Voltage Battery #PELIO-L20.48-G.

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.