Photovoltaic Kit 48V 5.28kW PLUS with TopSolar Inverter 6.2kW Wanroy 5.12kW Battery

48V 5.28kW Photovoltaic Kit PLUS with TopSolar Inverter 6.2kW Wanroy 5.12kW Battery

48V 5.28kW PV Kit PLUS includes of 12x440W photovoltaic panels, TopSolar Hybrid Solar Inverter 48v 6200VA to 230v MPPT 80A 500Vdc for 6400w PV, the Wanroy WY51100 100Ah 51.2V 5.12kWh LiFePO4 battery, 1000V Field DC electrical panel 1 string max 30A and power cables for Off-Grid systems with grid support. For more details, we recommend viewing the technical data sheets of each single component of the kit or asking our technicians for information.

The kit contains:
- n°12 440W monocrystalline silicon photovoltaic panels #N150000001 or superior.
- n°1 TopSolar Hybrid Solar Inverter 48v 6200VA to 230v MPPT 80A 500Vdc for 6400w PV #N150422022024; (the color of the inverter can be blue or white depending on stock availability)
- n°1 Wanroy WY51100 100Ah 51.2V 5.12kWh LiFePO4 Battery #WAWY51100
- n°1 DC string panel #N151400000
- n°25m Black single-pole photovoltaic cable 6mmq #N50830750292MT
- n°25m Red single-pole photovoltaic cable 6mmq #N50830750293MT
- n°3 Male MC4 connector #N50830750303
- n°3 Female MC4 connector #N50830750304
- n°1 Pair of red and black cables 25mmq 200cm with fuse for inverter power supply #N50824001151

n°12 - 440W Full Black ABC N-Type monocrystalline solar module

The 440W Full Black ABC N-Type solar module is a monocrystalline solar module with new generation N-Type All Black Contact (ABC) technology that ensures a high level of module efficiency. Classic, but with revolutionary changes! The greater absorption of radiation is one of the key points of this technology: having the connection points on the back of the cell, the front part is not limited in absorbing light, improving its efficiency.
It offers high power with up to 10% of energy produced compared to TOPCon modules. High efficiency thanks to greater optimization in case of shading and improved temperature coefficient with lower degradation rates (≤1%；≤0.35%). Optimized resistance to both high temperatures and microcracks.
The solar module is certified for use with wind and snow loads of 2400-5400 Pa. The module has a 3.2 mm thick tempered front glass with high light transmission. The frame is made of black anodized aluminum alloy.

Second generation monocrystalline photovoltaic panel with improved performance compared to the previous series.
• Optimization of partial shading
• Better temperature coefficient
• Hotspot temperature limitation
• Resistance to micro-cracks
• Higher power
• Lower BOS
25-year product warranty and 30-year production warranty with a degradation of <1% after the first year and ≤0.35% from the 2nd to the 30th year

Specification:
- Power (Pmax): 440 Wp;
- Voltage (Vmp): 33.50 V;
- Max Current (Imp): 13.14 A;
- Open Circuit Voltage (Voc): 40.49 V;
- Short-circuit current (Isc): 13.91 A;
- Cell efficiency: 22.5 %;
- Operating temperature: -40°C - +85°C;
- Max. system voltage: DC1500V (IEC/UL);
- Cell type: monocrystalline;
- Number of cells: 108 (6 x 18);
- Frame color: All Black;
- Length of connection cable: 1200 mm, 4 mmq;
- Degree of protection junction box: IP68, 3 diodes;
- Size: 1722x1134x30 mm;
- Weight: 20.5 kg;
Certifications:
- IEC 61730 (2016) IEC 61215 (2021)
- ISO 9001:2015 Quality Management System
- ISO 14001:2015 Environmental Management System
- ISO 45001:2018 Occupational Safety and Management System

n°1 - TopSolar Hybrid Solar Inverter 48v 6200VA to 230v MPPT 80A 500Vdc for 6400w PV

This inverter with display allows you to create an OFF GRID photovoltaic system of up to 6000w for recharging the 48V battery bank and using 230V alternating current with additional 230V AC input for emergency generator or network manager. The ALL in ONE inverter is the simplest system for creating an off-grid system with automatic exchange with the mains (or emergency generator), all components that usually make up a classic stand-alone photovoltaic system (charge regulator, inverter, control unit exchange and battery charger). With this inverter you will always be able to use renewable sources, therefore solar energy, energy stored in the battery and only in the event of the absence of the two renewables, the inverter automatically switches to the AC emergency input of the generator or network manager; This system allows you to have maximum savings on your bill or even completely eliminate the connection with the network operator.
Ideal for stand-alone or hybrid photovoltaic systems with AC mains or generator input.

Main features
• Pure Sine Wave.
• Built-in Wi-Fi for mobile monitoring (Android/Iphone app available).
• Removable LCD control module with multiple communications.
• Supply the load from the grid or PV, even if the battery is not available.
• Configurable AC/PV output usage timer and priority.
• Integrated MPPT Solar Controller.
• High efficiency pure sine wave inverter (PF=1).
• Wide PV input range (120V DC - 500V DC) 120A MPPT SCC.
• Increase to 2X continuous power for 5 seconds for engine loads.
• Automatic switch-on in case of AC power failure.
• Overload and short circuit protection.
• 3-stage intelligent battery charger to optimize battery performance.
• Automatic restart while AC is recovering.

Technical characteristics
Inverter output
- Continuous Power: 6200VA/5500W;
- Peak Power: 12000VA/10000W;
- Wave Type: Pure Sine Wave;
- AC Voltage Regulation: ±5%;
- Inverter Efficiency (Peak): 90-93%;
- Transfer Time: 15ms (for Personal Computers), 20ms (for home loads).
AC input
- Voltage: 230 Vac;
- Selectable voltage range: 170∼280 Vac (for Personal Computer) 90∼280 Vac (for household loads);
- Frequency: 50Hz - 60Hz (automatic detection).
DC Input (Battery)
- Nominal voltage: 48 Vdc;
- Charging Voltage: 40-60 Vdc;
DC Solar Controller and Charger and AC
- Maximum photovoltaic power: 6400W;
- Optimal photovoltaic voltage for MPPT: 120 Vdc ~ 450 Vdc;
- Maximum open circuit photovoltaic voltage: 500 Vdc;
- Maximum charging current: 120A;
- Maximum efficiency: 98%.
Mechanical Specifications
- Measurements: 438x295x105h mm;
- Weight: 9 kg.
Working conditions
- Humidity: 5% to 95% relative humidity;
- Operating temperature: from 10 °C to +50 °C;
- Storage temperature: -15 °C to +60 °C.

n°1 - Wanroy WY51100 100Ah 51.2V 5.12kWh LiFePO4 Battery
The modular battery for single-phase or three-phase self-consumption system has 5.12kWh of usable energy with the built-in BMS (Battery Management System) to interface with the inverter it is connected to. The energy storage system supports capacity expansion up to 3 energy storage modules, combining up to 15Kwh of batteries.
The energy storage module adopts lithium iron phosphate battery with excellent performance and long life. Each energy storage module with the intelligent BMS system is internally integrated and easily expandable. The battery pack can be combined with the inverter to form an off-grid PV energy storage system, which can solve the problem of power supply in areas without electricity. The energy storage module can be matched with major inverters on the market, such as SMA, Victron, Growatt, GoodWe, Deye, Jinlang, SRNE and so on.
•    Cloud service: remote diagnosis and elimination of error codes
•    Support WIFI module, intelligent APP monitoring
•    Built-in UPS and MPPT
•    Grade A EVE battery cell
•    Intelligent BMS protection
•    Saves space and easy installation
•    Customer service respond within 24 hours on business days
•    Applicable scenarios: home, islands, remote areas, areas with high electricity bills, factory, farm, etc.
•    Battery system: 10-year warranty

Technical Data
Battery Model: WY51100
Battery Type: LiFePO4
Battery Energy: 5.12 kWh
Battery Capacity: 100 Ah
Battery Nominal Voltage: 51.2 V
Battery Operating Voltage Range: 44.8~57.6 V
Maximum Charging Current: 100 A
Maximum Discharging Current: 100 A
Depth of Discharge: 80%
Bound Quantities: 3
Design Life: 6,000
Operating Temperature: Charging: 0°C ~ 60°C; Exhaust: - 20 °C ~ 65 °C
Operating humidity: 5%~85%
Rated operating altitude: 2,000 m
Protection degree: IP20
Installation method: Vertical
Recommended working environment: Indoor
Total weight: 47 kg
Dimensions (W×D×H): 580×145×480 mm
Certificates: CEI0-21, RCM, CEC, VDE2510-50, IEC62619, IEC 60730, UN38.3

n°1 - DC Field 1000V electrical panel 1 string max 30A with disconnector

Pre-assembled control unit, DC Field electrical panel, specific protection to protect the photovoltaic system output from the panels to the inverter from short circuits and voltage discharges. It must be set between the panels and the inverters in case it is needed to interrupt the DC flow to the inverter for maintenance. Suitable for all photovoltaic systems connected to the grid or to an island.
It is composed of:
- 1 2P disconnector fuse holder;
- 2 32A fuses - 1000VDC;
- 1 2P+earth surge arrester (600/1000VDC);
- 1 30A disconnector (1000VDC);
- IP65 protection class II.

n°1 - DC string panel #N151400000
n°25m - 6mmq black single-pole photovoltaic cable #N50830750292MT
n°25m - 6mmq red single-pole photovoltaic cable #N50830750293MT
n°3 - MC4 male connector #N50830750303
n°3 - MC4 female connector #N50830750304
n°1 - Pair of 25mmq 200cm red and black cables with fuse for inverter power supply #N50824001151

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.