Huawei SUN2000-36KTL-M3 36kW 40kVA Three-phase string Inverter 4 MPPT 27A

Huawei SUN2000-36KTL-M3 36kW 40kVA Three-phase string Inverter 4 MPPT 27A

Huawei SUN2000-36KTL-M3 36 kW 3-phase power string inverter is a device that allows you to convert the direct current supplied by the solar panels of a photovoltaic system into alternating current with three-phase output for the consumption of medium and large commercial premises. It is produced by the prestigious Huawei brand, a leading company in the production of photovoltaic, telecommunications, telephony equipment, etc.
8-string intelligent monitoring and quick troubleshooting. Maximum efficiency 98.7%. Fuse free design. Type II surge arresters for DC and AC. Can be combined with Huawei SUN2000-450W-P power optimizer. Radio control receiver interface.

Technical Specification
Max. efficiency 98.7%;
European efficiency: 98.4%.
Input
Max. Input Voltage: 1,100 V
Max. Current per MPPT: 27 A (per MPPT) / 20 A (per input);
Max. Short Circuit Current per MPPT: 40 A;
Start Voltage: 200 V;
MPPT Operating Voltage Range: 200 V ~ 1,000 V;
Nominal Input Voltage: 600 V;
Number of Inputs: 8;
Number of MPP Tracker: 4;
Output
Nominal AC Active Power: 36,000 W;
Max. AC Apparent Power: 40,000 VA;
Nominal Output Voltage: 230 Vac / 400 Vac / 480 Vac, 3W+(N)+PE;
Rated AC Grid Frequency: 50 Hz / 60 Hz;
Nominal Output Current: 52.0 A;
Max. Output Current: 58.0 A;
Adjustable Power Factor Range: 0.8 leading... 0.8 lagging;
Max. Total Harmonic Distortion: ＜3%.
Protection
Input-side Disconnection Device: Yes;
Anti-islanding Protection: Yes;
AC Overcurrent Protection: Yes;
DC Reverse-polarity Protection: Yes;
PV-array String Fault Monitoring: Yes ;
DC Surge Arrester: Yes;
AC Surge Arrester: Yes;
DC Insulation Resistance Detection: Yes;
Residual Current Monitoring Unit: Yes;
Arc Fault Protection: Yes;
Ripple Receiver Control: Yes;
Integrated PID Recovery: Yes.
Communication
Display: LED indicators; WLAN integrated, FusionSolar APP;
RS485: Yes;
Smart Dongle: WLAN/Ethernet via Smart Dongle-WLAN-FE (Optional) 4G/3G/2G via Smart Dongle-4G (Optional)
General Data
Dimensions (WxHxD): 640x530x270 mm;
Weight (with mounting plate): 43 kg;
Operating Temperature Range: -25°C ~ 60°C;
Cooling Method: Natural convection;
Max. Operating Altitude: 4,000 m (13,123 ft.) (Derating above 2000 m);
Relative Humidity: 0 ~ 100%;
DC Connector: Amphenol Helios H4;
AC Connector: Waterproof Connector + OT/DT Terminal;
Protection Degree: IP66;
Topology: Transformerless;
Nighttime Power Consumption: <5.5 W.
Standard Compliance (more available upon request)
Certificate: EN62109-1/-2,IEC62109-1/-2,EN50530,IEC62116,IEC60068,IEC61683;
Grid Connection Standards: IEC 61727,VDE-AR-N4105,VDE0126-1-1,BDEW,G59/3, UTEC15-712-1,  CEI0-16, CEI0-21, RD661,RD1699, P.O.12.3,RD413, EN-50438-Turkey, EN-50438-Ireland, C10/11,MEA, ResolutionNo.7, NRS097-2-1,AS/NZS4777.2, DEWA

For more details, we recommend viewing the technical data sheets of each single component of the kit or asking our technicians for information.

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.