4.1kW Single-phase solar Kit Solis S5-EH1P3.6K-L Hybrid Inverter With BackUp + Storage Prepared

4.1kW Single-phase solar Kit Solis S5-EH1P3.6K-L Hybrid Inverter With BackUp + Storage System

Solar kit consisting of 10 monocrystalline silicon photovoltaic panels with 410W peak power, Solis S5-EH1P3.6K-L Single-phase Hybrid Inverter 3.6kW 5700W 2Mppt Backup and Solis-1P-Meter 220V 60A 1-phase meter which allows you to produce electricity for free thanks to self-consumption and recharge any battery if connected.
This kit allows us to exploit photovoltaic energy to provide the necessary electricity. The inverter can directly supply the energy generated by the photovoltaic panels to the electrical system of your home or business to meet the energy needs. Also, if demand is high, the electricity grid will be combined with PV generation. At night, when there is no photovoltaic energy production, the home, industry or company is powered through the electricity distribution network. Grid-connected photovoltaic systems are the best-paying because they allow you to save on your electricity bill with a low investment.

The kit is made by:
- n°10 410W monocrystalline photovoltaic modules #N151030050303-8;
- n°1 Solis S5-EH1P3.6K-L Single-phase Hybrid Inverter 3.6kW 5700W 2Mppt Backup #S5EH1P36KL;
- n°1 Solis-1P-Meter 220V 60A 1-phase meter #S1PMETER.

n°10 Monocrystalline 410W photovoltaic panels

The 410W solar module is a high-efficiency black-white frame monocrystalline solar module with half-cut technologies, which consists of halving the cells. Efficiency of up to 21.3% thanks to superior cell technology and cutting-edge production methods. This technology reduces thermal resistance and increases power output by 5 to 10 Wp. Self-cleaning glass. Powerful module with low irradiance even in low light conditions (morning or cloudy).
• High efficiency monocrystalline technology
• Low current density technology to effectively reduce internal power consumption.
• MBB and HC technology to reduce negative affect from yielding caused by micro cracks and shadows.
• High power output leads to lower BOS cost.
Global, Tier 1 bankable brand, with independently certified state-of-the-art automated manufacturing. Industry leading lowest thermal coefficient of power. Industry leading 12 years product warranty. Excellent low irradiance performance. Excellent PID resistance. Dual stage 100% EL inspection warranting defect-free product. Module Imp binning radically reduces stringmismatch losses. Excellent wind load 2400Pa and snow load 5400Pa under certain installation method.
Specification:
Model: RSM120-8-410M-B-TW;
Nominal Power: 410 W;
Cell Type: Monocrystalline;
Number of cells in series: 120 (5x12+5x12);
Open-circuit Voltage (Voc): 41.90 V;
Maximum Power Voltage (Vmp): 34.89 V;
Short-circuit Current (Isc): 12.47 A;
Maximum Power Current (Imp): 11.76 A;
Max System Voltage: 1500 V DC;
Module Efficiency: 21.3 %;
Frame: anodizedaluminium alloy;
Dimension: 1754x1096x30 mm;
Weight: 21 kg.

n°1 Solis S5-EH1P3.6K-L Single-phase Hybrid Inverter 3.6kW 5700W 2Mppt Backup

The S5-EH1P3.6K-L energy storage inverter is designed for residential PV energy storage system. 5kW backup power supports more critical loads. Backup switching time is less than 20 ms. Integrate multiple protections and fault monitoring to ensure the safety of batteries and equipment.

• Max. string input current 15A
• Uninterrupted power supply, 20ms reaction
• 5kW backup power to support more important loads
• With shifting and peak shaving capabilities friendly to grid
• Multiple working modes to make maximize selfconsumption, increase benefit
• Higher charge-discharge efficiency, improving the economic benefits
• AFCI protection, proactively reduces fire risk
• Compatible with lithium & lead-acid batteries, increased more choice in different markets
• Fanless design, long lifespan
• Intelligent EMS function, improving battery's reliability
• With high-frequency isolation technology, making system safer and long lifespan
• 24-hour fully intelligent energy management, Realtime grasp of PV plant status
• Remotely control & upgrade function, making digital power plant maintenance at your fingertips

Technical specifications
DC input
Recommended max. PV power: 5.7 kW;
Max. input voltage: 600 V;
Rated voltage: 330V;
Starting voltage: 120V;
MPPT voltage range: 90-520V;
Maximum input current: 15A / 15A;
Maximum short circuit current: 22.5A / 22.5A;
MPPT number: 2;
Max. input strings number: 2.
Battery
Battery type: lithium-ion/lead-acid;
Battery voltage range: 42 - 58V;
Battery capacity: 50 - 2000 Ah;
Maximum charge/discharge power: 3 kW;
Maximum charge/discharge current: 62.5 A;
Communication: CAN.
Output AC (Grid side)
Rated output power: 3.6 kW;
Max. apparent output power: 4 kVA;
Operation phase: 1/N/PE;
Rated grid voltage: 220V / 230V;
Rated grid frequency: 50-60 Hz;
Rated grid output current: 16.4A / 15.7A;
Maximum output current: 18.5A;
Power Factor: > 0.99 (0.8 leading - 0.8 lagging);
THDi: <2%.
Output AC (backup)
Rated output power: 3 kW;
Maximum apparent output power: 4.5 kVA, 10SEC;
Back-up switch time <20 ms;
Rated output voltage: 1/N/PE, 220V / 230V;
Rated frequency: 50Hz / 60Hz;
Rated output current: 14A/13.5A;
THDv (@linear load): <2%.
Input AC (Grid side)
Input voltage range: 187-265V;
Maximum input current: 25A / 23.5A;
Frequency range: 45-55Hz / 55-65Hz.
Efficiency
Maximum efficiency: 97.1%;
EU efficiency: 96.5%.
Protection
DC Reverse-Polarity Protection: Yes;
Short circuit protection: Yes;
Output over current protection: Yes;
Surge protection: DC Type II / AC Type II;
Ground fault monitoring: Yes;
Anti-islanding system: Yes;
Integrated AFCI (DC arc fault circuit protection): Yes (Activation required);
Protection class/over voltage category: I/II.
General data
Dimensions (WxHxD): 333x505x249 mm;
Weight: 18.3 kg;
Topology: High Frequency Isolation (for battery);
Operating ambient temperature range: -25 ~ +60°C;
Ingress protection: IP65;
Cooling concept: Natural convection;
Maximum operating altitude: 3000 m;
Grid connection standards: G98 or G99, VDE-AR-N 4105/VDE V 0124, EN 50549-1, VDE 0126/UTE C 15/VFR:2019, RD 1699/RD 244/UNE 206006/UNE 206007-1, CEI 0 -21, C10/11, NRS 097-2-1, EIFS 2018.2, IEC 62116, IEC 61727, IEC 60068, IEC 61683, EN 50530, MEA, PEA;
Safety/EMC standards: IEC/EN 62109-1/-2, EN 61000-6-2/-3.
Features
DC connection: MC4 connector;
AC connection: Quick connect plug;
Display: 7" color LCD;
Communication: RS485, Optional: Wi-Fi, GPRS

n°1 Solis-1P-Meter 220V 60A 1-phase meter for Solis string inverter

Solis-1P-Meter is a device designed for energy measurement and monitoring in photovoltaic PV systems.
Real-time Energy Measurement
 Solis-1P-Meter accurately measures the energy generated by the PV system in real-time. This allows users to monitor the precise amount of energy being produced at any given moment.
Remote Monitoring
The device is equipped with remote monitoring capabilities, enabling users to access energy production data from anywhere using a mobile application or online platform. This feature provides convenience and accessibility for monitoring PV system performance remotely.
Data Visualization
Solis-1P-Meter provides detailed data visualization, including graphs and reports showing daily, weekly, monthly, and yearly energy production. It also displays other relevant information such as voltage, current, and power, giving users comprehensive insights into their PV system's performance.
Alarm and Notifications
Users can configure the device to send alerts and notifications in case of system issues or anomalies in energy production. This proactive notification system helps users address any issues promptly, ensuring optimal performance and reliability of the PV system.
Integration
Solis-1P-Meter is designed to seamlessly integrate with other energy monitoring systems and management devices. This integration allows users to have a unified and comprehensive view of their energy performance and facilitates better decision-making for system optimization.
Simple Installation and Configuration
The device is designed for easy installation and configuration, minimizing the time and effort required to set up energy monitoring for the PV system. This user-friendly approach enhances the overall user experience and reduces setup complexities.

Features:
- Model: DDSD1352;
- Grid topology: 1P+N;
- Rated voltage: 220V;
- Input current: 10(60) A;
- RS485 (MODBUS-RTU);
- Operating temperature: -25°C ~ 55°C;
- LCD display;
- DIN 35 mm;
- Size (LxWxH): 36x89x62 mm.
Meter compatible with models:
- Solis-Mini-(0.7-3600)-4G
- S5 & S5-GR1P(0.7-3.6)K-M
- Solis-1P(2.5-6)K-4G
- S6 & S5-GR1P(2.5-6)K & Plus
- Solis-1P(7-8)K-5G

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.