7.38kW Single-Phase Solar Kit Goodwe GW6000N-EH 6kW Hybrid Inverter with BackUp + Storgae system

7.38kW Single-Phase Solar Kit Goodwe GW6000N-EH 6kW Hybrid Inverter with BackUp + Storgae system

Solar kit made up of 18 410W monocrystalline silicon photovoltaic panels, the Goodwe GW6000N-EH 6kW Single-Phase Hybrid Inverter and the GoodWe GM1000 120A 40mA 230Vac Single-Phase Smart Power Sensor which allows you to produce electricity for free and thanks to self-consumption.
This kit allows us to exploit photovoltaic energy to provide the necessary electricity. The inverter can directly supply the energy generated by the photovoltaic panels to the electrical system of the house or of your company to meet the energy needs. Furthermore, if the demand is high, the electricity grid will be combined with photovoltaic generation. At night, when there is no photovoltaic energy production, the home, industry or business is powered through the electrical distribution network. The photovoltaic systems connected to the grid are the ones that pay the best because they allow you to save on your electricity bill with a limited investment.
The kit is made by:
- n°18 410W monocrystalline photovoltaic modules #N151030050303-8;
- n°1 Goodwe GW6000N-EH 6kW Single-Phase Hybrid Inverter #KR3552934;
- n°1 GoodWe GM1000 120A 40mA 230Vac Single-Phase Smart Power Sensor #KR3530796;

n°18 410W Monocrystalline photovoltaic panels

The 410W solar module is a high-efficiency black-white frame monocrystalline solar module with half-cut technologies, which consists of halving the cells. Efficiency of up to 21.3% thanks to superior cell technology and cutting-edge production methods. This technology reduces thermal resistance and increases power output by 5 to 10 Wp. Self-cleaning glass. Powerful module with low irradiance even in low light conditions (morning or cloudy).
• High efficiency monocrystalline technology
• Low current density technology to effectively reduce internal power consumption.
• MBB and HC technology to reduce negative affect from yielding caused by micro cracks and shadows.
• High power output leads to lower BOS cost.
Global, Tier 1 bankable brand, with independently certified state-of-the-art automated manufacturing. Industry leading lowest thermal coefficient of power. Industry leading 12 years product warranty. Excellent low irradiance performance. Excellent PID resistance. Dual stage 100% EL inspection warranting defect-free product. Module Imp binning radically reduces stringmismatch losses. Excellent wind load 2400Pa and snow load 5400Pa under certain installation method.
Specification:
Model: RSM120-8-410M-B-TW;
Nominal Power: 410 W;
Cell Type: Monocrystalline;
Number of cells in series: 120 (5x12+5x12);
Open-circuit Voltage (Voc): 41.90 V;
Maximum Power Voltage (Vmp): 34.89 V;
Short-circuit Current (Isc): 12.47 A;
Maximum Power Current (Imp): 11.76 A;
Max System Voltage: 1500 V DC;
Module Efficiency: 21.3 %;
Frame: anodizedaluminium alloy;
Dimension: 1754x1096x30 mm;
Weight: 21 kg.

n°1 Goodwe GW6000N-EH 6kW Single-Phase Hybrid Inverter

Efficient solar energy storage solutions are essential for increasing energy self-sufficiency levels. The EH PLUS+ inverter is designed to maximize energy yield, optimize self-consumption, facilitate peak shaving and provide emergency energy. With a modern design that requires no cooling fan, operation is quiet and reliable. A battery-ready version of the inverter is available. The EH PLUS+ series is compatible with a wide range of batteries, including GoodWe's Lynx Home F.
Improving energy independence for PV roof owners
• High backup power
• UPS level switching <10ms
• Intelligent integration into the home environment
Optimized energy autonomy
High backup output power with overload capability. The wide battery voltage range (85-450V) supports different battery capacities and powers.
Wide range of battery voltages
Integrated dynamic power export limitation and load monitoring
Maximum safety standards
The metal aluminum housing with IP65 degree of protection protects the inverter and allows it to be installed both indoors and outdoors.
• IP65 degree of protection
• High quality components

Specific characteristics:
Battery input data
- Battery type: Lithium Ion
- Battery Rated Voltage: 350V
- Battery voltage range: 85~460V
- Max. continuous charge current: 25A
- Max. continuous discharge current: 25A
- Max. charging power: 6000W
- Max. discharge power: 6000W
PV string input data
- Max. input voltage: 580V
- MPPT Operating Voltage Range: 100~550V
- Starting voltage: 90V
- Rated input voltage: 380V
- Max. input current for MPPT: 16A
- Max. short circuit current for MPPT: 21.2 A;
- Number of MPP trackers: 2
- Number of strings for MPPT: 1
AC side output data (on-grid)
- Nominal apparent power output on mains: 6000 VA
- Max. apparent power output on mains: 6000/6600 VA
- Max. apparent power from mains: 12000 VA (6kW recharge, 6kW backup output)
- Rated output voltage: 230/220
- Rated network frequency AC side: 50/60 Hz
- Max. AC side current output on mains: 26.1/28.7 A
- Max. AC side current from mains: 52.2 A
- Output power factor: ~ 1 (adjustable from 0.8 capacitive to 0.8 inductive)
- Max. total harmonic distortion: <3%
AC side output data (back-up)
- Nominal apparent backup power: 6000 VA
- Max. apparent output power: 6000 VA (7200@60s)
- Max. output current: 26.1A
- Rated output voltage: 230V (±2%)
- Nominal output frequency: 50/60Hz (±0.2%)
- Output THDv (with linear load): <3%
Efficiency
- Max. efficiency: 97.6%
- European efficiency: 97.0%
- Maximum. battery to AC efficiency: 96.6%
- MPPT efficiency: 99.9%
Protection
- PV insulation resistance detection: Integrated
- Residual current monitoring: Integrated
- Battery reverse polarity protection: Integrated
- PV reverse polarity protection: Integrated
- Anti-isolation protection: Integrated
- AC side overcurrent protection: Integrated
- AC side short circuit protection: Integrated
- AC side overvoltage protection: Integrated
- DC-side surge arrester: Type II
General data
- Operating temperature range: -25 ~ +60°C
- Relative Humidity: 0 ~ 95%
- Max. operating altitude: 3000m
- Cooling method: Natural convection
- User interface: LED, APP
- Communication with BMS: RS485; CAN
- Communication with meter: RS485
- Communication with portal: WiFi / Ethernet (Optional)
- Weight: 17kg
- Dimensions (W×H×D): 354x433x147 mm
- Topology: Non-Isolated
- Night power consumption: <10
- Ingress protection degree: IP65
- Installation type: Wall mounting.

n°1 - GoodWe GM1000 120A 40mA 230Vac Single-Phase Smart Power Sensor

GoodWe Smart Meter is designed with high precision small dimensions, convenient operation and installation. It is available for single-phase grid system connection to detect voltage, current, power and energy, for working with inverters including SEMS systems for the purpose energy management.
To detect voltage, current, power and energy, and for working with inverters including SEMS systems for the purpose of energy management.

Technical Specification
Model: GM1000;
Application: Single-phase;
Nominal Voltage: 230Vac;
Voltage Range: 0.7~1.2 Un;
Frequency: 50Hz/60Hz;
Current Input: External opening and closing CT access: 120A/40mA;
Self-Consumption: <3W;
Data Detection: Voltage, current, active power, reactive power, power factor, frequency;
Energy Calculation: Active/ Reactive Power Energy;
Voltage/Current: Class 1;
Active Power: Class 1;
Reactive Power: Class 2;
Communication with inverter: RS485;
Interface: 3 LED (power, energy consumption, communication), USB port, reset button;
Protection Class: IP20 (for indoor use);
Installation method: Mounting rack;
Operating Temperature: -20 ~ 60°C,
Operating Humidity: <95%, No condensation;
Altitude: <2000m;
Size (LxWxH): 36x85x66.5 mm;
Weight: ±220 g.

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.