Camper Boat Kit N0++ All 12V 400W + LiFePO4 300Ah + SmartSolar MPPT 100/30 + Cable Kit Storage 3840Wh

Camper Boat Kit N0++ All 12V 400W + LiFePO4 300Ah + SmartSolar MPPT 100/30 + Cable Kit Storage 3840Wh

N0++ All 12V 400W Camper Kit complete with two 200W photovoltaic modules, SmartSolar MPPT 100/30 30A Solar Charge Controller Victron Energy, Ultimatron LiFePO4 12V 300Ah UBL-12-300-PRO with a BMS charge management and monitoring system, Victron Energy Orion-Tr Smart 12/12V 30A 360W DC-DC Charger Isolated, Victron Blue Smart 12/15/1 Charger 12V 15A IP22 1 wall outlet with Bluetooth and Solar Cable Kit 2x5m-6mmq with F/M MC4 connectors for stand-alone PV systems, remote houses, camper vans, boats, industrial applications, lighting systems, road signs, TVCC systems and much more.
The kit is made by:
2 - 200W 12V monocrystalline silicon photovoltaic panels #N52330050179;
1 - Victron Energy SmartSolar MPPT 100/30 30A Solar Charge Controller #UF21678K;
1 - Ultimatron LiFePO4 12V 300Ah UBL-12-300-PRO 12.8V Lithium Battery BMS Smart Bluetooth 3840Wh #ULUBL12300;
1 - Victron Energy Orion-Tr Smart 12/12V 30A 360W DC-DC Charger Isolated #UF23149S;
1 - Victron Energy Blue Smart Series Battery Charger 12V 15A 1 output IP22 #N52421020520;
1 - Solar Cable Kit 2x5m-6mmq with F/M MC4 connectors #N151230750281.

n°2 - 200W 12V monocrystalline silicon photovoltaic panels

Designed for the rural electrification, data survey, telecommunication and special applications. Thanks to its versatility, the panel is very popular and used both in developing countries as well as the European market. Furthermore every single cell and module produced have been tested and checked several times throughout the manufacturing process. The interconnections between panels are easy, practical and optimized for every configuration and voltage. Robust construction and heavy duty anodized aluminium frame design makes this module suitable, safe, simple and fast to be installed in many situations.
Prevent the loss of electricity: used on the roof of the car, charge the car battery at any time. Can prevent the car battery from losing electricity, and solve the situation that the car cannot be fired due to the battery loss caused by the long-term parking of the vehicle.
Elettrodomestici di bordo: quando si utilizzano gli elettrodomestici di bordo, la potenza originale della batteria dell'auto non si perde (audio per auto, navigatore, registratore di guida, aspiratore, ventilatore per auto, frigorifero per auto, cellulare, ecc.).

Features:
- High module conversion efficiency.
- The efficiency of high-quality and high-efficiency monocrystalline silicon wafers can reach 22%.
- Excellent performances even during low solar radiation (cloudiness, morning or evening).
- Solar-grade tempered prismatic glass.
- High-quality cells and partial-cell design lower series resistance and reduce power degradation.
- Strict and continuous quality controls during all the production phases up to shipment.
- A-grade solar cells.
- Anti-corrosion EVA effectively protects the battery panel.
- Strong and anti-wind and snow, unique technology to avoid freezing of water in the frame and deformation.
- Lightweight and flexible features can make it seamlessly integrated into your vehicle.
- The integrated bypass-diodes allow the panel to work when partially shaded.
- IP67 rated junction box, reliable cables and standard MC4 connectors improve the stability.

Technical data:
- Model: SZ-200-36M;
- Peak power: 200 W;
- Cell type: Monocrystalline;
- Cell Efficiency: 22%;
- Cell configuration: 36 monocrystalline silicon cells;
- Vmp: 18.15 V;
- Imp: 11.02 A;
- Voc: 21.57 V;
- Isc: 11.69 A;
- Maximum system voltage: 500 V;
- Output tolerance: 0±3%;
- Cable: 700 mm/2.5 mm²;
- Connector type: MC4/MC4 compatible;
- Model structure: Aluminum frame, glass, EVA, black backsheet;
- Junction box classified ≥IP67;
- Working temperature: -40°C ~ +80°C;
- Size: 1100x890x30 mm;
- Weight: 11.60 kg.
Mechanical Data:
Standard Test Conditions AM=1.5, E=1000W/m2, TC=25℃.

Note:
Pv module provided with cable MC4 connectors.
If the distance between the PV module and charge controller is less than 10 mt, we recommend using 4 mm² cable;
If the distance between the PV module and charge controller is more than 10 mt, we recommend using 6 mm² cable.

n°1 - Victron Energy SmartSolar MPPT 100/30 30A Solar Charge Controller

Ultra-fast Maximum Power Point Tracking (MPPT): Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Load output: Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a preset voltage.
BatteryLife: intelligent battery management. The BatteryLife algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%.
Resin encapsulated electronics. Day/night timing and light dimming option.
Outstanding conversion efficiency: No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F). No cooling fan.
Advanced Maximum Power Point Detection in case of partial shading conditions: If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPT’s tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Flexible charge algorithm: Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch.
Extensive electronic protection: Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection

Technical Specifications:
Battery voltage: 12/24V auto detected
Maximum output current: 30 A
Maximum PV power: 440W(12V) 880W (24V)
Maximum PV open circuit voltage: 100V
Maximum efficiency: 98%
Self-consumption: 100mA
Operating temperature: -30°C ÷ +60°C
Protection class: IP 43 (electronic components) - IP22 (connections)
Weight kg (lbs): 1,3 (2.9)
Size: 130x186 x70 mm (5.1x7.3x2.8 inches).

n°1 - Ultimatron LiFePO4 12V 300Ah UBL-12-300-PRO 12.8V Lithium Battery BMS Smart Bluetooth 3840Wh

The UBL-12-300-PRO 300 Ah - LiFePO4 from Ultimatron is a lithium iron phosphate battery that is characterized by a number of advantages. Ultimatron offers you high performance, high safety standards, a long service life and a continuous improvement in storage capacity. High performance even in extreme conditions. Deep and constant discharge and refill efficiency.
Furthermore, thanks to the BMS (Battery Management System) Smart integrated with Bluetooth 4.0 connection, it is possible to monitor the values in real time and the status of the battery directly from your smartphone thanks to the convenient dedicated App, for smartphone or tablet.
The fields of application of lithium batteries are diverse, especially for stationary or mobile use. In particular, mobile homes, solar boats, electric boats, electric scooters, golf cars or even electromobiles / wheelchairs and cleaning machines are increasingly equipped.
•    The safest technology, with no risk of fire or explosion
•    Long service life
•    High stability even under extreme loads
•    No memory effect, no need for full charge and discharge cycles
•    High performance even under extreme conditions
•    Deep and regular discharge and charge efficiency
•    Small size and low weight
•    Integrated battery management system (BMS)

Technical specifications:
- Model: UBL-12-300-PRO;
- Battery type: Lithium Iron Phosphate LiFePO4;
- Nominal voltage: 12.8V;
- Nominal capacity: 300 Ah;
- Capacity @ 60A: 300 min;
- Energy: 3840 Wh;
- Resistance: ≤15 mΩ @ 50% SOC;
- Self-discharge: <3% / month;
- Number of cycles: >6000 at 80% DoD;
- Recommended charging current: 90 A;
- Maximum charging current: 150 A;
- Recommended charging voltage: 14.6 V;
- Switch-off voltage of the charge: 14.6 V (2000 ms);
- Switch voltage back on: ≤13.8V;
- Equalizing voltage: >12.8V;
- Terminal type: M8;
- Discharge peak current: 600A (200-500ms);
- Discharge cut-off voltage: 10V (2000ms);
- Reconnection voltage: >11.2V;
- Short-circuit protection: 1000-2000A ± 400A (200-800μs);
- Maximum continuous discharge current: 200A;
- Dimensions: 522x218x240 mm;
- Weight: 28.25 kg;
- Warranty: 5 years.

Conditions for series and parallel connection
The batteries must be of the same batch and of the same model. Before connecting the batteries in series or parallel, please charge them fully.

ATTENTION:
• Ultimatron LiFePO4 batteries can be connected both in series and in parallel in the maximum number of 4 units.
• Ultimatron batteries cannot be used as engine starter batteries.
If charged by alternators (campers and other vehicles) it is advisable to install a lithium battery charger.
• The BMS does not cut currents above 50A but the battery wears out above this value first.

n°1 - Victron Energy Orion-Tr Smart 12/12V 30A 360W DC-DC Charger Isolated

The Orion-Tr Smart DC-DC charger isolated is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch.
The Orion-Tr Smart charger is suitable for both lead acid and lithium batteries. This model is 360W and unlimited multiple units can be connected in parallel to increase output power. Suitable for high temperatures up to 55°C with a full rated output up to 40°C.
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
• For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
• For lithium batteries absorption time is fixed, default 2 hours.
• Alternatively, a fixed output voltage can be chosen.
Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
High temperature protected The output current will reduce at high ambient temperature.
IP43 protection When installed with the screw terminals oriented downwards.
Screw terminals No special tools needed for installation.
Input fuse (not replaceable)
Features:
Model: Orion-Tr SMART 12/12-30 Isolated;
Input voltage range(1): 10-17V;
Under-Voltage Shutdown: 7V;
Under voltage restart: 7.5V;
Rated output voltage: 12.2V;
Output voltage regulation range: 10-15V;
Output voltage tolerance: +/- 0.2V;
Output Noise: 2mV rms;
continuous current output at nominal output voltage and 40 ºC: 30 A;
Maximum output current (10 sec.) at nominal output voltage minus 20 %: 40 A;
Short circuit output current 60A;
Continuous power output at 25ºC: 430W;
Continuous output power at 40ºC: 360W;
Efficiency: 87%;
Without load current at the load input: < 80 mA;
Standby current < 1mA;
Galvanic Isolation: 200 VDC between input, output and case;
Operating temperature range: -20 to +55 ºC (3 % reduction per °C above 40 °C);
Humidity: Max. 95% non-condensing;
DC connection: Screw terminals;
Maximum cable cross section: 16 mm² (AWG6);
Weight: 1.8kg (3lbs);
Dimensions HxWxD: 130x186x70 mm (5.1 x 7.3 x 4.0 inches);
Protection category: IP43 (electronic components), IP22 (connection area);
Standards: EN 60950, EN 61000-6-3, EN 55014-1, EN 61000-6-2, EN 61000-6-1, EN 55014-2, ECE R10-5.

n°1 - Victron Energy Blue Smart Series Battery Charger 12V 15A 1 output IP22

The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
The battery is charged, smartly... to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
Recovery of deeply-discharged 'dead' batteries
Unlike other brands, the Blue Smart IP22 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Check the status of your battery remotely
The Blue Smart IP22 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Specifications:
Model: 12/15 IP22 - 1 Output
Input voltage range: 180-265V AC / 45-65Hz
Charge voltage absorption: 12V Normal 14,4V, High 14,6V, Li-ion 14,2V
Charge voltage Float: 12V Normal 13,8V, High 13,8V, Li-ion 13,35V
Charge voltage Storage: 12V Normal 13,2V, High 13,8V, Li-ion 13,5V
Charge current: 15 A
Weight kg (lbs): 1.4 (3.1)
Size: 235x108x65 mm (9.2 x 4.2 x 2.6 inches)

n°1 - Solar Cable Kit 2x5m-6mmq with F/M MC4 connectors

Cable kit made of black 6 mm² 5 meter photovoltaic cable, red 6 mm² 5 meter photovoltaic cable, MC4 female and male connectors. Specifically designed for the creation of quick and safe connections in the field of photovoltaic applications with the most common inverter and junction boxe. They are made with tinned copper contacts and PPO housing. Resistant to mechanical and climatic stress and resistant to UV rays. The cables and connectors are supplied pre-wired.

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.