Deye SUN-40K-SG01HP3-EU-BM4 40kW ON-OFF GridThree-Phase Hybrid Inverter CEI-021

40kW 4 MPPT Deye SUN-40K-SG01HP3-EU-BM4

Deye SUN-40K-SG01HP3-EU-BM4 hybrid PV inverter is suitable for residential, commercial and industrial PV systems, maximizing the self-consumption rate of solar energy and increasing energy independence.

During the day, the PV system generates electricity, which is initially supplied to the loads. Then, the excess energy will charge the battery. Finally, the stored energy can be released when the loads need it.

The battery can also be charged by a diesel generator to ensure uninterrupted power supply in the event of a grid blackout.

With the intelligent monitoring platform, Deye SUN-40K-SG01HP3-EU-BM4 inverters support immediate remote shutdown in the event of an accident.

With the intelligent monitoring platform, Deye full series inverter products support immediate remote shutdown in the event of an accident. Remote parameter setting and FW upgrade simplify the O&M of the PV system.

• 100% unbalanced output, each phase; max output up to 50% of rated power

• AC torque for retrofitting existingSolar system

• Max 10pcs parallel for on-grid and off-grid operation, support multiple batteries in parallel

• Max 50+50A charge/discharge current

• 160-800V high voltage battery, Lithium

• Support energy storage from diesel generator

Technical Data

Model: SUN-40K-SG01HP3-EU-BM4

Battery Input Data

Battery Type: Lithium-ion

Battery Voltage Range: 160-800V

Maximum Charge Current: 50+50Ah

Maximum Discharge Current: 50+50Ah

Charging Strategy for Lithium-ion Battery: Self-adaptation to BMS

Number of Input Batteries: 2

PV String Input Data

Maximum PV Access Power: 52,000W

Maximum DC Input Voltage: 1000V

Starting Voltage: 180V

MPPT Voltage Range: 150-850V

Nominal DC Input Voltage: 600V

Max. Operating PV Input Current: 36+36+36A

Maximum Input Short Circuit Current: 55+55+55 A

Number of MPP locators/Number of MPP Tracker strings: 4/8

AC input/output data

Rated active AC input/output power: 40,000 W

Maximum AC input/output apparent power: 44,000 WA

Rated AC input/output current: 60.7/58 A

Maximum AC input/output current: 66.7/63.8 A

Peak power (Off-grid): 2 times nominal power, 10 S

Power factor adjustment range: 0.8 leading - 0.8 legging

Rated input/output voltage/range: 220/380 V, 230/400 V - 0.85Un-1.1Un

Rated input/output grid frequency/range: 50/45-55, 60/55-65 Hz

Module grid connection: 3L+N+PE

Total current harmonic distortion THDi: <3% (of rated power)

DC injection current: <0.5% In

Efficiency

Maximum: 97.6%

Euro efficiency: 97.0%

MPPT efficiency: <99%

Equipment protection

Built-in: DC reverse polarity connection protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short circuit protection, DC component monitoring, Overvoltage load drop protection, Earth fault current monitoring, Arc fault circuit interrupter (optional), Power grid monitoring, Island protection monitoring, Earth fault detection, DC input switch, DC terminal insulation impedance monitoring, Residual current detection (RCD), Surge protection level

Surge protection level: TYPE II(DC), TYPE II(AC)

Interface

Communication interface: RS485/WIFI/CAN

General

Operating temperature range: -40 to +60℃, >45℃ Derating

Allowable ambient humidity: 0-100%

Allowable altitude: 2000m

Noise: <55 dB

Ingress protection rating: IP 65

Inverter topology: Non-isolated

Overvoltage category: OVC II(DC), OVC III(AC)

Cabinet dimensions (WxHxD): 527x894x294 mm (Excluding connectors and brackets)

Weight: 80 kg

Cooling type: Intelligent area cooling

Warranty: 5 years/10 years The warranty period depends on the final installation site of Inverter, More information Please refer to DEYE warranty policy provided by the manufacturer.

Grid regulation: IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G98, G99, VDE-AR-N 4105

Safety / EMC Standard: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.