Ultimatron 24V 4kVA 3600W Off Grid hybrid inverter at 230V MPPT 110A 450Vdc for 5000W PV

Ultimatron All-in-One 24V 4kVA 3600VA Hybrid Solar Inverter at 230V MPPT 110A 450Vdc for 5000W photovoltaic

This inverter with display allows you to create an OFF GRID photovoltaic system of up to 5000W for recharging the 24V battery bank and using 230V alternating current with additional 230V AC input for emergency generator or network manager. The ALL in ONE inverter is the simplest system for creating an off-grid system with automatic exchange with the mains (or emergency generator), all components that usually make up a classic stand-alone photovoltaic system (charge regulator, inverter, control unit exchange and battery charger). With this inverter you will always be able to use renewable sources, therefore solar energy, energy stored in the battery and only in the event of the absence of the two renewables, the inverter automatically switches to the AC emergency input of the generator or network manager. This system allows you to have maximum savings on your bill or even completely eliminate the connection with the network operator.
Ideal for stand-alone or hybrid photovoltaic systems with AC mains or generator input.
The energy produced by the MPS-4.2K inverters is intelligently directed and used for optimal performance. All priorities can be defined by the user: use of batteries, solar or AC source (grid or generator) In self-consumption, the energy produced by your panels is fluctuating and does not correspond to consumption. The MPS-4.2K inverter stores part of the solar production in the batteries for subsequent use in the evening or at night. On an isolated site, the MPS-4.2K inverter can be connected to a generator to charge the batteries if they are low and solar production is insufficient. This inverter is able to work with different energy sources such as: public network, photovoltaic panels, thermal generator, batteries.
The microprocessor management directs the energy based on production, consumption needs and the state of charge of the batteries. Real-time monitoring can be done locally or remotely. The MPS-4.2K inverter does not reinject energy into the electricity grid.

• Pure Sine Wave Inverter
• Programmable power priority for PV, battery or grid
• High PV input voltage range (55~450VDC)
• Compatible with lithium-ion battery
• Integrated MPPT solar charging
• Support BMS communication with lithium battery
• Intelligent battery charging design to optimize battery life
• Overload, high temperature, short circuit protection inverter output
• Cold start function
• Intelligent fan speed adjustment
• Integrated anti-twilight kit for harsh environments (optional)
• WIFI and GPRS available for IOS and android

Technical characteristics:
INVERTER OUTPUT
- Rated Power: 4000 VA/3600 W;
- Surge Power: 8000 VA;
- Waveform: Pure sine wave;
- AC Voltage Regulation (Batt.Mode): 230 VAC±5%;
- Transfer Time: 10ms (For Personal Computers) 20ms(For Home Appliances).
AC INPUT
- Voltage: 230 VAC;
- Selectable Voltage Range: 170~280 VAC (For Personal Computers) 90~280VAC (For Home Appliances);
- Frequency Range: 50 Hz/60 Hz (Auto sensing).
BATTERY
- Nominal voltage: 24 VDC;
- Floating Charge Voltage: 27 VDC;
- Overcharge Protection: 31 VDC
- Maximum AC Charge Current: 80 A.
SOLAR CHARGER & AC CHARGER
- Solar charger type: MPPT;
- Maximum PV Array Power: 5000 W;
- MPPT Range @ Operating Voltage: 55~450 VDC;
- Maximum PV Array Open Circuit Voltage: 450 VDC;
- Maximum AC Charge Current: 110 A;
- Maximum Efficiency: 98%.
OTHER
- Humidity: 5% to 95% Relative Humidity (Non-condensing);
- Operating Temperature: 10 °C - 55 °C;
- Storage Temperature: -15 °C - 60 °C.
MECHANICAL SPECIFICATION
- Dimension, WxHxD: 423x290x100 mm;
- Net Weight: 7 kg;
- Communication interface: RS232/RS485 (standard), GPRS/WIFI (optional).

IMPORTANT NOTE:
The reduced VAT is reserved for PRIVATE INDIVIDUALS, end users and qualified photovoltaic and thermal energy installers or heat production INSTALLED IN ITALY. In case you do not have the right to the tax deduction (DEALERS) kindly contact us in advance so that an invoice with 22% VAT can be issued as per the law in force. In the absence of receipt of the declaration the order cannot be shipped as a copy of the VAT declaration form must by law be attached to the company invoice. The declaration form and ID document must be sent to the email address. 
After purchase, kindly complete and return the VAT declaration form together with a copy of an ID document.